Standard V Belts
-
Dunlop Dunlop Z54 Blue Wave V-Belt
Dunlop Z54 Blue Wave V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.BLUE WAVE rubber belts are developed with high resistant tensile elements, they are characterised by high performances, length stability during belts life, conductivity, oil and heat resistance. They are particularly suitable for centrifugal pumps, compressor, tool machines, generators, high power mills and stone mills.Specification Code: Z54 Manufacturer: Dunlop Width (mm): 10 Depth (mm): 6 Outside length (mm): 1410 Pitch length (mm): 1394 Pitch Length (in): 54.9 Inside length (mm): 1372 Inside length (in): 54 Pitch between bands (mm banded type only): -
£6.02
-
Dunlop Dunlop Z55 Blue Wave V-Belt
Dunlop Z55 Blue Wave V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.BLUE WAVE rubber belts are developed with high resistant tensile elements, they are characterised by high performances, length stability during belts life, conductivity, oil and heat resistance. They are particularly suitable for centrifugal pumps, compressor, tool machines, generators, high power mills and stone mills.Specification Code: Z55 Manufacturer: Dunlop Width (mm): 10 Depth (mm): 6 Outside length (mm): 1435 Pitch length (mm): 1419 Pitch Length (in): 55.9 Inside length (mm): 1397 Inside length (in): 55 Pitch between bands (mm banded type only): -
£6.14
-
Dunlop Dunlop Z56 Blue Wave V-Belt
Dunlop Z56 Blue Wave V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.BLUE WAVE rubber belts are developed with high resistant tensile elements, they are characterised by high performances, length stability during belts life, conductivity, oil and heat resistance. They are particularly suitable for centrifugal pumps, compressor, tool machines, generators, high power mills and stone mills.Specification Code: Z56 Manufacturer: Dunlop Width (mm): 10 Depth (mm): 6 Outside length (mm): 1460 Pitch length (mm): 1444 Pitch Length (in): 56.9 Inside length (mm): 1422 Inside length (in): 56 Pitch between bands (mm banded type only): -
£6.24
-
Dunlop Dunlop Z57 Blue Wave V-Belt
Dunlop Z57 Blue Wave V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.BLUE WAVE rubber belts are developed with high resistant tensile elements, they are characterised by high performances, length stability during belts life, conductivity, oil and heat resistance. They are particularly suitable for centrifugal pumps, compressor, tool machines, generators, high power mills and stone mills.Specification Code: Z57 Manufacturer: Dunlop Width (mm): 10 Depth (mm): 6 Outside length (mm): 1486 Pitch length (mm): 1470 Pitch Length (in): 57.9 Inside length (mm): 1448 Inside length (in): 57 Pitch between bands (mm banded type only): -
£6.36
-
Dunlop Dunlop Z58 Blue Wave V-Belt
Dunlop Z58 Blue Wave V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.BLUE WAVE rubber belts are developed with high resistant tensile elements, they are characterised by high performances, length stability during belts life, conductivity, oil and heat resistance. They are particularly suitable for centrifugal pumps, compressor, tool machines, generators, high power mills and stone mills.Specification Code: Z58 Manufacturer: Dunlop Width (mm): 10 Depth (mm): 6 Outside length (mm): 1511 Pitch length (mm): 1495 Pitch Length (in): 58.9 Inside length (mm): 1473 Inside length (in): 58 Pitch between bands (mm banded type only): -
£6.48
-
Dunlop Dunlop Z59 Blue Wave V-Belt
Dunlop Z59 Blue Wave V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.BLUE WAVE rubber belts are developed with high resistant tensile elements, they are characterised by high performances, length stability during belts life, conductivity, oil and heat resistance. They are particularly suitable for centrifugal pumps, compressor, tool machines, generators, high power mills and stone mills.Specification Code: Z59 Manufacturer: Dunlop Width (mm): 10 Depth (mm): 6 Outside length (mm): 1537 Pitch length (mm): 1521 Pitch Length (in): 59.9 Inside length (mm): 1499 Inside length (in): 59 Pitch between bands (mm banded type only): -
£6.60
-
Dunlop Dunlop Z63 Blue Wave V-Belt
Dunlop Z63 Blue Wave V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.BLUE WAVE rubber belts are developed with high resistant tensile elements, they are characterised by high performances, length stability during belts life, conductivity, oil and heat resistance. They are particularly suitable for centrifugal pumps, compressor, tool machines, generators, high power mills and stone mills.Specification Code: Z63 Manufacturer: Dunlop Width (mm): 10 Depth (mm): 6 Outside length (mm): 1638 Pitch length (mm): 1622 Pitch Length (in): 63.9 Inside length (mm): 1600 Inside length (in): 63 Pitch between bands (mm banded type only): -
£7.04
-
Dunlop Dunlop Z65 Blue Wave V-Belt
Dunlop Z65 Blue Wave V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.BLUE WAVE rubber belts are developed with high resistant tensile elements, they are characterised by high performances, length stability during belts life, conductivity, oil and heat resistance. They are particularly suitable for centrifugal pumps, compressor, tool machines, generators, high power mills and stone mills.Specification Code: Z65 Manufacturer: Dunlop Width (mm): 10 Depth (mm): 6 Outside length (mm): 1689 Pitch length (mm): 1673 Pitch Length (in): 65.9 Inside length (mm): 1651 Inside length (in): 65 Pitch between bands (mm banded type only): -
£7.28
-
Dunlop Dunlop Z66 Blue Wave V-Belt
Dunlop Z66 Blue Wave V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.BLUE WAVE rubber belts are developed with high resistant tensile elements, they are characterised by high performances, length stability during belts life, conductivity, oil and heat resistance. They are particularly suitable for centrifugal pumps, compressor, tool machines, generators, high power mills and stone mills.Specification Code: Z66 Manufacturer: Dunlop Width (mm): 10 Depth (mm): 6 Outside length (mm): 1714 Pitch length (mm): 1698 Pitch Length (in): 66.9 Inside length (mm): 1676 Inside length (in): 66 Pitch between bands (mm banded type only): -
£7.40
-
Dunlop Dunlop Z67 Blue Wave V-Belt
Dunlop Z67 Blue Wave V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.BLUE WAVE rubber belts are developed with high resistant tensile elements, they are characterised by high performances, length stability during belts life, conductivity, oil and heat resistance. They are particularly suitable for centrifugal pumps, compressor, tool machines, generators, high power mills and stone mills.Specification Code: Z67 Manufacturer: Dunlop Width (mm): 10 Depth (mm): 6 Outside length (mm): 1740 Pitch length (mm): 1724 Pitch Length (in): 67.9 Inside length (mm): 1702 Inside length (in): 67 Pitch between bands (mm banded type only): -
£7.50
-
Dunlop Dunlop Z69 Blue Wave V-Belt
Dunlop Z69 Blue Wave V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.BLUE WAVE rubber belts are developed with high resistant tensile elements, they are characterised by high performances, length stability during belts life, conductivity, oil and heat resistance. They are particularly suitable for centrifugal pumps, compressor, tool machines, generators, high power mills and stone mills.Specification Code: Z69 Manufacturer: Dunlop Width (mm): 10 Depth (mm): 6 Outside length (mm): 1791 Pitch length (mm): 1775 Pitch Length (in): 69.9 Inside length (mm): 1753 Inside length (in): 69 Pitch between bands (mm banded type only): -
£7.74
-
Dunlop Dunlop Z71 Blue Wave V-Belt
Dunlop Z71 Blue Wave V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.BLUE WAVE rubber belts are developed with high resistant tensile elements, they are characterised by high performances, length stability during belts life, conductivity, oil and heat resistance. They are particularly suitable for centrifugal pumps, compressor, tool machines, generators, high power mills and stone mills.Specification Code: Z71 Manufacturer: Dunlop Width (mm): 10 Depth (mm): 6 Outside length (mm): 1841 Pitch length (mm): 1825 Pitch Length (in): 71.9 Inside length (mm): 1803 Inside length (in): 71 Pitch between bands (mm banded type only): -
£7.96
-
Dunlop Dunlop Z73 Blue Wave V-Belt
Dunlop Z73 Blue Wave V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.BLUE WAVE rubber belts are developed with high resistant tensile elements, they are characterised by high performances, length stability during belts life, conductivity, oil and heat resistance. They are particularly suitable for centrifugal pumps, compressor, tool machines, generators, high power mills and stone mills.Specification Code: Z73 Manufacturer: Dunlop Width (mm): 10 Depth (mm): 6 Outside length (mm): 1892 Pitch length (mm): 1876 Pitch Length (in): 73.9 Inside length (mm): 1854 Inside length (in): 73 Pitch between bands (mm banded type only): -
£8.20
-
Dunlop Dunlop Z15 White Flash V-Belt
Dunlop Z15 White Flash V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.WHITE FLASH belts were designed to offer durable and reliable performances on light and medium-duty drives. They represent an affordable solution for transmission systems of all industrial sectors.Specification Code: Z15 Manufacturer: Dunlop Width (mm): 10 Depth (mm): 6 Outside length (mm): 419 Pitch length (mm): 403 Pitch Length (in): 15.9 Inside length (mm): 381 Inside length (in): 15 Pitch between bands (mm banded type only): -
£2.02
-
Dunlop Dunlop Z16 White Flash V-Belt
Dunlop Z16 White Flash V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.WHITE FLASH belts were designed to offer durable and reliable performances on light and medium-duty drives. They represent an affordable solution for transmission systems of all industrial sectors.Specification Code: Z16 Manufacturer: Dunlop Width (mm): 10 Depth (mm): 6 Outside length (mm): 444 Pitch length (mm): 428 Pitch Length (in): 16.9 Inside length (mm): 406 Inside length (in): 16 Pitch between bands (mm banded type only): -
£2.02
-
Dunlop Dunlop Z16-1/2 White Flash V-Belt
Dunlop Z16-1/2 White Flash V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.WHITE FLASH belts were designed to offer durable and reliable performances on light and medium-duty drives. They represent an affordable solution for transmission systems of all industrial sectors.Specification Code: Z16-1/2 Manufacturer: Dunlop Width (mm): 10 Depth (mm): 6 Outside length (mm): 457 Pitch length (mm): 441 Pitch Length (in): 17.4 Inside length (mm): 419 Inside length (in): 16.5 Pitch between bands (mm banded type only): -
£2.00
-
Dunlop Dunlop Z17 White Flash V-Belt
Dunlop Z17 White Flash V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.WHITE FLASH belts were designed to offer durable and reliable performances on light and medium-duty drives. They represent an affordable solution for transmission systems of all industrial sectors.Specification Code: Z17 Manufacturer: Dunlop Width (mm): 10 Depth (mm): 6 Outside length (mm): 470 Pitch length (mm): 454 Pitch Length (in): 17.9 Inside length (mm): 432 Inside length (in): 17 Pitch between bands (mm banded type only): -
£2.02
-
Dunlop Dunlop Z18 White Flash V-Belt
Dunlop Z18 White Flash V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.WHITE FLASH belts were designed to offer durable and reliable performances on light and medium-duty drives. They represent an affordable solution for transmission systems of all industrial sectors.Specification Code: Z18 Manufacturer: Dunlop Width (mm): 10 Depth (mm): 6 Outside length (mm): 495 Pitch length (mm): 479 Pitch Length (in): 18.9 Inside length (mm): 457 Inside length (in): 18 Pitch between bands (mm banded type only): -
£2.02
-
Dunlop Dunlop Z19 White Flash V-Belt
Dunlop Z19 White Flash V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.WHITE FLASH belts were designed to offer durable and reliable performances on light and medium-duty drives. They represent an affordable solution for transmission systems of all industrial sectors.Specification Code: Z19 Manufacturer: Dunlop Width (mm): 10 Depth (mm): 6 Outside length (mm): 521 Pitch length (mm): 505 Pitch Length (in): 19.9 Inside length (mm): 483 Inside length (in): 19 Pitch between bands (mm banded type only): -
£2.02
-
Dunlop Dunlop Z19-1/2 White Flash V-Belt
Dunlop Z19-1/2 White Flash V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.WHITE FLASH belts were designed to offer durable and reliable performances on light and medium-duty drives. They represent an affordable solution for transmission systems of all industrial sectors.Specification Code: Z19-1/2 Manufacturer: Dunlop Width (mm): 10 Depth (mm): 6 Outside length (mm): 533 Pitch length (mm): 517 Pitch Length (in): 20.4 Inside length (mm): 495 Inside length (in): 19.5 Pitch between bands (mm banded type only): -
£2.00
-
Dunlop Dunlop Z20 White Flash V-Belt
Dunlop Z20 White Flash V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.WHITE FLASH belts were designed to offer durable and reliable performances on light and medium-duty drives. They represent an affordable solution for transmission systems of all industrial sectors.Specification Code: Z20 Manufacturer: Dunlop Width (mm): 10 Depth (mm): 6 Outside length (mm): 546 Pitch length (mm): 530 Pitch Length (in): 20.9 Inside length (mm): 508 Inside length (in): 20 Pitch between bands (mm banded type only): -
£2.02
-
Dunlop Dunlop Z20-1/2 White Flash V-Belt
Dunlop Z20-1/2 White Flash V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.WHITE FLASH belts were designed to offer durable and reliable performances on light and medium-duty drives. They represent an affordable solution for transmission systems of all industrial sectors.Specification Code: Z20-1/2 Manufacturer: Dunlop Width (mm): 10 Depth (mm): 6 Outside length (mm): 559 Pitch length (mm): 543 Pitch Length (in): 21.4 Inside length (mm): 521 Inside length (in): 20.5 Pitch between bands (mm banded type only): -
£2.00
-
Dunlop Dunlop Z21 White Flash V-Belt
Dunlop Z21 White Flash V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.WHITE FLASH belts were designed to offer durable and reliable performances on light and medium-duty drives. They represent an affordable solution for transmission systems of all industrial sectors.Specification Code: Z21 Manufacturer: Dunlop Width (mm): 10 Depth (mm): 6 Outside length (mm): 571 Pitch length (mm): 555 Pitch Length (in): 21.9 Inside length (mm): 533 Inside length (in): 21 Pitch between bands (mm banded type only): -
£2.02
-
Dunlop Dunlop Z21-1/2 White Flash V-Belt
Dunlop Z21-1/2 White Flash V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.WHITE FLASH belts were designed to offer durable and reliable performances on light and medium-duty drives. They represent an affordable solution for transmission systems of all industrial sectors.Specification Code: Z21-1/2 Manufacturer: Dunlop Width (mm): 10 Depth (mm): 6 Outside length (mm): 584 Pitch length (mm): 568 Pitch Length (in): 22.4 Inside length (mm): 546 Inside length (in): 21.5 Pitch between bands (mm banded type only): -
£2.00
-
Dunlop Dunlop Z22 White Flash V-Belt
Dunlop Z22 White Flash V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.WHITE FLASH belts were designed to offer durable and reliable performances on light and medium-duty drives. They represent an affordable solution for transmission systems of all industrial sectors.Specification Code: Z22 Manufacturer: Dunlop Width (mm): 10 Depth (mm): 6 Outside length (mm): 597 Pitch length (mm): 581 Pitch Length (in): 22.9 Inside length (mm): 559 Inside length (in): 22 Pitch between bands (mm banded type only): -
£2.02
You have seen 2275 out of 3408 products
