Standard V Belts
-
Dunlop Dunlop B165 Blue Wave V-Belt
Dunlop B165 Blue Wave V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.BLUE WAVE rubber belts are developed with high resistant tensile elements, they are characterised by high performances, length stability during belts life, conductivity, oil and heat resistance. They are particularly suitable for centrifugal pumps, compressor, tool machines, generators, high power mills and stone mills.Specification Code: B165 Manufacturer: Dunlop Width (mm): 17 Depth (mm): 11 Outside length (mm): 4261 Pitch length (mm): 4231 Pitch Length (in): 166.6 Inside length (mm): 4191 Inside length (in): 165 Pitch between bands (mm banded type only): -
£37.21
-
Dunlop Dunlop B167 Blue Wave V-Belt
Dunlop B167 Blue Wave V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.BLUE WAVE rubber belts are developed with high resistant tensile elements, they are characterised by high performances, length stability during belts life, conductivity, oil and heat resistance. They are particularly suitable for centrifugal pumps, compressor, tool machines, generators, high power mills and stone mills.Specification Code: B167 Manufacturer: Dunlop Width (mm): 17 Depth (mm): 11 Outside length (mm): 4312 Pitch length (mm): 4282 Pitch Length (in): 168.6 Inside length (mm): 4242 Inside length (in): 167 Pitch between bands (mm banded type only): -
£37.93
-
Dunlop Dunlop B168 Blue Wave V-Belt
Dunlop B168 Blue Wave V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.BLUE WAVE rubber belts are developed with high resistant tensile elements, they are characterised by high performances, length stability during belts life, conductivity, oil and heat resistance. They are particularly suitable for centrifugal pumps, compressor, tool machines, generators, high power mills and stone mills.Specification Code: B168 Manufacturer: Dunlop Width (mm): 17 Depth (mm): 11 Outside length (mm): 4337 Pitch length (mm): 4307 Pitch Length (in): 169.6 Inside length (mm): 4267 Inside length (in): 168 Pitch between bands (mm banded type only): -
£38.18
-
Dunlop Dunlop B173 Blue Wave V-Belt
Dunlop B173 Blue Wave V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.BLUE WAVE rubber belts are developed with high resistant tensile elements, they are characterised by high performances, length stability during belts life, conductivity, oil and heat resistance. They are particularly suitable for centrifugal pumps, compressor, tool machines, generators, high power mills and stone mills.Specification Code: B173 Manufacturer: Dunlop Width (mm): 17 Depth (mm): 11 Outside length (mm): 4464 Pitch length (mm): 4434 Pitch Length (in): 174.6 Inside length (mm): 4394 Inside length (in): 173 Pitch between bands (mm banded type only): -
£39.38
-
Dunlop Dunlop B175 Blue Wave V-Belt
Dunlop B175 Blue Wave V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.BLUE WAVE rubber belts are developed with high resistant tensile elements, they are characterised by high performances, length stability during belts life, conductivity, oil and heat resistance. They are particularly suitable for centrifugal pumps, compressor, tool machines, generators, high power mills and stone mills.Specification Code: B175 Manufacturer: Dunlop Width (mm): 17 Depth (mm): 11 Outside length (mm): 4515 Pitch length (mm): 4485 Pitch Length (in): 176.6 Inside length (mm): 4445 Inside length (in): 175 Pitch between bands (mm banded type only): -
£39.86
-
Dunlop Dunlop B177 Blue Wave V-Belt
Dunlop B177 Blue Wave V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.BLUE WAVE rubber belts are developed with high resistant tensile elements, they are characterised by high performances, length stability during belts life, conductivity, oil and heat resistance. They are particularly suitable for centrifugal pumps, compressor, tool machines, generators, high power mills and stone mills.Specification Code: B177 Manufacturer: Dunlop Width (mm): 17 Depth (mm): 11 Outside length (mm): 4566 Pitch length (mm): 4536 Pitch Length (in): 178.6 Inside length (mm): 4496 Inside length (in): 177 Pitch between bands (mm banded type only): -
£40.34
-
Dunlop Dunlop B180 Blue Wave V-Belt
Dunlop B180 Blue Wave V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.BLUE WAVE rubber belts are developed with high resistant tensile elements, they are characterised by high performances, length stability during belts life, conductivity, oil and heat resistance. They are particularly suitable for centrifugal pumps, compressor, tool machines, generators, high power mills and stone mills.Specification Code: B180 Manufacturer: Dunlop Width (mm): 17 Depth (mm): 11 Outside length (mm): 4642 Pitch length (mm): 4612 Pitch Length (in): 181.6 Inside length (mm): 4572 Inside length (in): 180 Pitch between bands (mm banded type only): -
£41.06
-
Dunlop Dunlop B186 Blue Wave V-Belt
Dunlop B186 Blue Wave V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.BLUE WAVE rubber belts are developed with high resistant tensile elements, they are characterised by high performances, length stability during belts life, conductivity, oil and heat resistance. They are particularly suitable for centrifugal pumps, compressor, tool machines, generators, high power mills and stone mills.Specification Code: B186 Manufacturer: Dunlop Width (mm): 17 Depth (mm): 11 Outside length (mm): 4794 Pitch length (mm): 4764 Pitch Length (in): 187.6 Inside length (mm): 4724 Inside length (in): 186 Pitch between bands (mm banded type only): -
£42.50
-
Dunlop Dunlop B188 Blue Wave V-Belt
Dunlop B188 Blue Wave V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.BLUE WAVE rubber belts are developed with high resistant tensile elements, they are characterised by high performances, length stability during belts life, conductivity, oil and heat resistance. They are particularly suitable for centrifugal pumps, compressor, tool machines, generators, high power mills and stone mills.Specification Code: B188 Manufacturer: Dunlop Width (mm): 17 Depth (mm): 11 Outside length (mm): 4845 Pitch length (mm): 4815 Pitch Length (in): 189.6 Inside length (mm): 4775 Inside length (in): 188 Pitch between bands (mm banded type only): -
£42.99
-
Dunlop Dunlop B23 White Flash V-Belt
Dunlop B23 White Flash V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.WHITE FLASH belts were designed to offer durable and reliable performances on light and medium-duty drives. They represent an affordable solution for transmission systems of all industrial sectors.Specification Code: B23 Manufacturer: Dunlop Width (mm): 17 Depth (mm): 11 Outside length (mm): 654 Pitch length (mm): 624 Pitch Length (in): 24.6 Inside length (mm): 584 Inside length (in): 23 Pitch between bands (mm banded type only): -
£3.28
-
Dunlop Dunlop B24 White Flash V-Belt
Dunlop B24 White Flash V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.WHITE FLASH belts were designed to offer durable and reliable performances on light and medium-duty drives. They represent an affordable solution for transmission systems of all industrial sectors.Specification Code: B24 Manufacturer: Dunlop Width (mm): 17 Depth (mm): 11 Outside length (mm): 680 Pitch length (mm): 650 Pitch Length (in): 25.6 Inside length (mm): 610 Inside length (in): 24 Pitch between bands (mm banded type only): -
£3.28
-
Dunlop Dunlop B25 White Flash V-Belt
Dunlop B25 White Flash V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.WHITE FLASH belts were designed to offer durable and reliable performances on light and medium-duty drives. They represent an affordable solution for transmission systems of all industrial sectors.Specification Code: B25 Manufacturer: Dunlop Width (mm): 17 Depth (mm): 11 Outside length (mm): 705 Pitch length (mm): 675 Pitch Length (in): 26.6 Inside length (mm): 635 Inside length (in): 25 Pitch between bands (mm banded type only): -
£3.28
-
Dunlop Dunlop B26 White Flash V-Belt
Dunlop B26 White Flash V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.WHITE FLASH belts were designed to offer durable and reliable performances on light and medium-duty drives. They represent an affordable solution for transmission systems of all industrial sectors.Specification Code: B26 Manufacturer: Dunlop Width (mm): 17 Depth (mm): 11 Outside length (mm): 730 Pitch length (mm): 700 Pitch Length (in): 27.6 Inside length (mm): 660 Inside length (in): 26 Pitch between bands (mm banded type only): -
£3.28
-
Dunlop Dunlop B27 White Flash V-Belt
Dunlop B27 White Flash V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.WHITE FLASH belts were designed to offer durable and reliable performances on light and medium-duty drives. They represent an affordable solution for transmission systems of all industrial sectors.Specification Code: B27 Manufacturer: Dunlop Width (mm): 17 Depth (mm): 11 Outside length (mm): 756 Pitch length (mm): 726 Pitch Length (in): 28.6 Inside length (mm): 686 Inside length (in): 27 Pitch between bands (mm banded type only): -
£3.28
-
Dunlop Dunlop B28 White Flash V-Belt
Dunlop B28 White Flash V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.WHITE FLASH belts were designed to offer durable and reliable performances on light and medium-duty drives. They represent an affordable solution for transmission systems of all industrial sectors.Specification Code: B28 Manufacturer: Dunlop Width (mm): 17 Depth (mm): 11 Outside length (mm): 781 Pitch length (mm): 751 Pitch Length (in): 29.6 Inside length (mm): 711 Inside length (in): 28 Pitch between bands (mm banded type only): -
£3.28
-
Dunlop Dunlop B29 White Flash V-Belt
Dunlop B29 White Flash V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.WHITE FLASH belts were designed to offer durable and reliable performances on light and medium-duty drives. They represent an affordable solution for transmission systems of all industrial sectors.Specification Code: B29 Manufacturer: Dunlop Width (mm): 17 Depth (mm): 11 Outside length (mm): 807 Pitch length (mm): 777 Pitch Length (in): 30.6 Inside length (mm): 737 Inside length (in): 29 Pitch between bands (mm banded type only): -
£3.28
-
Dunlop Dunlop B30 White Flash V-Belt
Dunlop B30 White Flash V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.WHITE FLASH belts were designed to offer durable and reliable performances on light and medium-duty drives. They represent an affordable solution for transmission systems of all industrial sectors.Specification Code: B30 Manufacturer: Dunlop Width (mm): 17 Depth (mm): 11 Outside length (mm): 832 Pitch length (mm): 802 Pitch Length (in): 31.6 Inside length (mm): 762 Inside length (in): 30 Pitch between bands (mm banded type only): -
£3.28
-
Dunlop Dunlop B30-1/2 White Flash V-Belt
Dunlop B30-1/2 White Flash V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.WHITE FLASH belts were designed to offer durable and reliable performances on light and medium-duty drives. They represent an affordable solution for transmission systems of all industrial sectors.Specification Code: B30-1/2 Manufacturer: Dunlop Width (mm): 17 Depth (mm): 11 Outside length (mm): 844.7 Pitch length (mm): 814.7 Pitch Length (in): 32.1 Inside length (mm): 774.7 Inside length (in): 30.5 Pitch between bands (mm banded type only): -
£3.36
-
Dunlop Dunlop B31 White Flash V-Belt
Dunlop B31 White Flash V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.WHITE FLASH belts were designed to offer durable and reliable performances on light and medium-duty drives. They represent an affordable solution for transmission systems of all industrial sectors.Specification Code: B31 Manufacturer: Dunlop Width (mm): 17 Depth (mm): 11 Outside length (mm): 857 Pitch length (mm): 827 Pitch Length (in): 32.6 Inside length (mm): 787 Inside length (in): 31 Pitch between bands (mm banded type only): -
£3.36
-
Dunlop Dunlop B31-1/2 White Flash V-Belt
Dunlop B31-1/2 White Flash V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.WHITE FLASH belts were designed to offer durable and reliable performances on light and medium-duty drives. They represent an affordable solution for transmission systems of all industrial sectors.Specification Code: B31-1/2 Manufacturer: Dunlop Width (mm): 17 Depth (mm): 11 Outside length (mm): 870.1 Pitch length (mm): 840.1 Pitch Length (in): 33.1 Inside length (mm): 800.1 Inside length (in): 31.5 Pitch between bands (mm banded type only): -
£3.47
-
Dunlop Dunlop B32 White Flash V-Belt
Dunlop B32 White Flash V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.WHITE FLASH belts were designed to offer durable and reliable performances on light and medium-duty drives. They represent an affordable solution for transmission systems of all industrial sectors.Specification Code: B32 Manufacturer: Dunlop Width (mm): 17 Depth (mm): 11 Outside length (mm): 883 Pitch length (mm): 853 Pitch Length (in): 33.6 Inside length (mm): 813 Inside length (in): 32 Pitch between bands (mm banded type only): -
£3.53
-
Dunlop Dunlop B33 White Flash V-Belt
Dunlop B33 White Flash V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.WHITE FLASH belts were designed to offer durable and reliable performances on light and medium-duty drives. They represent an affordable solution for transmission systems of all industrial sectors.Specification Code: B33 Manufacturer: Dunlop Width (mm): 17 Depth (mm): 11 Outside length (mm): 908 Pitch length (mm): 878 Pitch Length (in): 34.6 Inside length (mm): 838 Inside length (in): 33 Pitch between bands (mm banded type only): -
£3.63
-
Dunlop Dunlop B34 White Flash V-Belt
Dunlop B34 White Flash V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.WHITE FLASH belts were designed to offer durable and reliable performances on light and medium-duty drives. They represent an affordable solution for transmission systems of all industrial sectors.Specification Code: B34 Manufacturer: Dunlop Width (mm): 17 Depth (mm): 11 Outside length (mm): 934 Pitch length (mm): 904 Pitch Length (in): 35.6 Inside length (mm): 864 Inside length (in): 34 Pitch between bands (mm banded type only): -
£3.74
-
Dunlop Dunlop B35 White Flash V-Belt
Dunlop B35 White Flash V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.WHITE FLASH belts were designed to offer durable and reliable performances on light and medium-duty drives. They represent an affordable solution for transmission systems of all industrial sectors.Specification Code: B35 Manufacturer: Dunlop Width (mm): 17 Depth (mm): 11 Outside length (mm): 959 Pitch length (mm): 929 Pitch Length (in): 36.6 Inside length (mm): 889 Inside length (in): 35 Pitch between bands (mm banded type only): -
£3.84
-
Dunlop Dunlop B35-1/2 White Flash V-Belt
Dunlop B35-1/2 White Flash V-BeltTraditional V-Belts are manufactured with cross-sections Z, A, B, C & D sections with a range of over 500 lengths currently available. V-Belts for industrial use are designated both to RMA standard e.g. A52, where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm.WHITE FLASH belts were designed to offer durable and reliable performances on light and medium-duty drives. They represent an affordable solution for transmission systems of all industrial sectors.Specification Code: B35-1/2 Manufacturer: Dunlop Width (mm): 17 Depth (mm): 11 Outside length (mm): 972 Pitch length (mm): 942 Pitch Length (in): 37.1 Inside length (mm): 902 Inside length (in): 35.5 Pitch between bands (mm banded type only): -
£3.95
You have seen 2575 out of 3408 products
